UZY 6IN1 150000 Puffs

Six independent warehouse structures and warehouse-by-warehouse usage mechanism
Six sealed e-liquid tanks are arranged inside the fuselage, each corresponding to a separate atomization core and air passage. Physical partitions are used between each compartment, ensuring that the liquid and air flow are not connected. This design ensures that the six flavors do not interfere with each other during use, and there will be no situation where the residual taste of the previous bite mixes into the next. The equipment adopts a compartmental-by-compartment switching working mode. The user selects the current e-liquid tank to be used by rotating the dial at the top. Once selected, the other tanks remain closed. After one warehouse is completely used up, you can manually switch to the next unused new warehouse. This method ensures that the e-liquid in each warehouse is in a completely sealed state before opening the warehouse, preventing premature oxidation or leakage.

Atomization stability and leak prevention
Each atomization channel has undergone individual power calibration at the factory. When switching between different flavors, the device will automatically invoke the power parameters of the corresponding channels to prevent uneven atomization caused by differences in e-liquid viscosity or formula. From the first port to the 150,000-port, the difference in atomization volume before and after is controlled within 10%, and there will be no situation where the smoke becomes significantly lighter or a burnt smell occurs in the later stage. The bottom of the e-liquid tank is isolated from the air intake hole by a double-layer silicone rubber sealing ring. The airway is equipped with a condensate reflux trough. A small amount of condensate can flow back to the bottom of the chamber by itself and will not seep out from the suction nozzle. The equipment was placed upright, upside down or sideways for more than 30 minutes without any leakage.